|
Bogen Digital Home Paging Receiver
| Seller: mralphe ( 18  )
End Time: 2008-07-26 06:40:06 GMT
Bids: 1
Current Price: $0.99
Location: Reno, Nevada
Time Left: 0 Seconds |  | | For More Details: Click here |
The Bogen RM350D is a unique, self-contained paging system for small- to medium-sized
applications. It combines a digital tuner, microphone, and aux inputs with a 35-watt
output capable of driving 4- and 8-ohm speaker systems as well as 25 or 70 volt
distributed systems. The tuner section uses a PLL synthesizer to provide accurate
frequency selection. An LCD display shows the frequency readout. The tuner may
be programmed with up to 18 FM and 12 AM preset stations. Pushbuttons are provided
to tune stations, select presets, and scan preset stations.
Microphone input
accepts a balanced Lo-Z microphone. The input uses a three-pin standard mic connector
and has its own volume control. The input includes a switch-selected ALC circuit
to maintain a uniform output level. The input also includes VOX-activated music
muting of the program from tuner or aux source. Provisions are included to mute
the program using dry contacts from a customer-supplied switch (selectable for
normally open or closed; factory set for normally open). A pushbutton on the
front panel is used to select program from the tuner or aux input. The aux input
consists of an RCA jack and can accept signal from a cassette tape, CD, or other
line level source. Bass, treble and volume controls are provided to adjust the
level of selected program (does not affect the microphone The receiver permits
connection of up to four switch-selected paging zones. A pushbutton is included
to select all zones at once.
A pre-page output lets you route tuner or auxiliary
program to a telephone music-on-hold input. The output is not affected by volume,
bass, or treble settings. The receiver can accept input from a telephone line
when an accessory transformer (the Bogen Model WMT1A) is used as the interface.
Output taps are provided for direct connection of 4- and 8-ohm speakers and for
connection of 25 or 70 volt distributed systems. Individual zone taps are provided
for ease of connection. An impedance jumper is provided to set the output signal
on the zone taps. The receiver operates from nominal 120V/60Hz AC. It may be rack-mounted
using optional accessory brackets (Model RPK47), or placed upon a shelf.
- PLL synthesized tuning with digital
readout
- 18 FM & 12 AM presets
- 35-watt audio output
- Switch-selected
page zones
- MIC includes VOX- or contact-activated music muting
-
MIC input Automatic Level Control (ALC)
- Memory scan
- Bass and
treble controls
- AUX input
- UL listed
*THIS ITEM IS IN PERFECT OPERATIONAL CONDITION. IT HAS A FEW MINOR COSMETIC BLEMISHES.*
| |
|
