Designed for spots where clearance is tight, this X10 SocketRocket
compact screw-in lamp module is perfect for table lamps,
indoor
light fixtures, ceiling fans, and in places where you don't have enough
space to use a standard X10 Screw-In Lamp Module.
Remotely turn ON/OFF any
wired-in light
Compact design fits into most
light fixtures
No new wiring required
One Year Warranty included
click here for details.
We get our products direct
from X10 so you are assured great quality
MORE INFORMATION
Only
1 1/4 inches in diameter (it extends the bulb by about 1 1/4 inches)
with a 3/8 inch bump on one side, this module will fit inside the cover
of most wired-in light fixtures, such as ceiling lights with glass or
plastic covers. And because it's small enough to fit under most
lampshades, it's perfect for table lamps, too. Installation
is as easy as 1-2-3!
(1) Simply
screw the lamp module into the socket and a light bulb into the module.
(2)Set the unit code: Unlike
conventional X-10 modules the X10 Compact Screw-In Lamp Module does not
have any code wheels. To set the unit code, apply power to the light
and within 30 seconds, send the X10 code for the module three times. On
the third press, the lamp will turn on signifying that the code has
been learned. The code will be remember even after a power
failure.
(3)
Leave the
light switch flipped to the 'ON' position and you're ready to remotely
turn the light on or off from any X10 transmitter plugged into any AC
outlet in your home, without running a single wire. The module even
responds to the ALL LIGHTS ON and ALL UNITS OFF command.
Want to expand your X10 Home Automation system and control more lights
in your home? Order several and automate
every wired-in light in your home in minutes! "The Home Automation
Store" makes it easy to get as many modules as you need to fully
automate & control all the lights in your home. Click below to
purchase
multiple
modules in any quantity or get them in packs of three and save.
)
